AT600USB

Standard Features:

•     Combined DVB-S Input and DVB-ASI/SPI Output Device.
•     High Speed USB 2.0
•     Windows 2000 & XP Drivers and BDA / Direct Show Drivers & API.
•     Accompanied by DVSStation2 Alitronika's Application Software.
Input
•     DVB-S Compliant QPSK Reception.
•     Input Frequency Range: 950 MHz to 2150 MHz.
•     Symbol Rate: 1 Mbaud to 54 Mbaud.
•     Supports 188, 204 Transport Packet Sizes.
Output
•     RF Loop Through Output.
•     Simultaneous two Serial ( ASI )
      and one Parallel ( SPI ) Outputs.
•     Supports DVB According to
      Standard A1010 Rev1 and EN50083.

Block Diagram:

Applications:

Targeted for Digital Video Professionals, Sophisticated End Users and OEMs
The AT600USB is an ideal solution for a number of applications such as:
•     Development Tools.
•     DVB to IP Gateway.
•     DVB-S to DVB-ASI & DVB-SPI Converter.
•     MPEG-II Transport Stream Recording, Monitoring, Playing & Processing.
•     Software Based MPEGII Decoders.

Specifications:

•     On Board Buffer: 16 Mbytes
•     RF Tuner Connector: 75 Ohms IEC female Type
•     Loop Through Connector: 75 Ohms IEC male Type.
•     Input Frequency Range:950 MHz to 2150 MHz.
•     Input Signal Level:-65dBm to -25dBm @ 27.5 Mbaud.
•     Input Symbol Rate: 1 Mbaud to 45 Mbaud.
•     LO Step Size: 1MHz.
•     FEC method: Viterbi, Puncture Rate:1/2, 2/3, 3/4, 5/6 and 7/8.
•     Standards: DVB-S.
•     Modulation Method: QPSK.
•     DVB-ASI Connector: 75 Ohms BNC.
•     Output Signal level: 1.0Vp-p nominal.
•     DVB-SPI Connector: 25-pin sub-D.
•     DVB-ASI Output Bit Rate: 0 to 214 Mbit/s.
•     DVB-SPI Output Bit Rate: 0 to 108 Mbit/s.
•     DVB-ASI Output Clock: 270 MHz.
•     DVB-SPI Output Clock: 0 to 13.5 MHz.
•     DVB-SPI Output Level: LVDS.

Please click HERE to download the datasheet.