
AT800PCI
DVB-T (Terrestrial ) Receiver, Full TS Recorder, DVB-ASI/SPI Player, DVB-T
to DVB-ASI/SPI Converter

Standard Features:
• Combined
DVB-T Input and DVB-ASI/SPI Output Board.
• PCI 2.2, 32 bit, 33/66MHz 3.3V.
• Bus Master DMA, Scatter /Gather Interface Protocol.
• Windows 2000 & XP Drivers and now Linux Drivers & API.
• Accompanied by DVSStation2 Alitronika's Application
Software.
Input
• DVB-T Compliant COFDM Reception.
• Input Frequency Range:
• UHF: 470 MHz to 862 MHz.
• VHF: 174 MHz to 230 MHz.
• Modulation Modes: QPSK, 16QAM, 64QAM.
• COFDM Spectrum: DVB-T and DTG compliant.
• Supports 188, 204 Transport Packet Sizes.
Output
• RF Loop Through Output.
• Simultaneous two Serial and one Parallel Outputs.
• Supports DVB According to Standard A1010 Rev1 and
EN50083.
Block Diagram:
Applications:
Targeted for Digital Video Professionals, Sophisticated End Users and OEMs
The AT800PCI is an ideal solution for a number of applications such as:
•
Development Tools.
•
DVB to IP Gateway.
•
DVB-T to DVB-ASI & DVB-SPI
Converter.
•
MPEG-II Transport Stream
Recording, Monitoring, Playing & Processing.
•
Software Based MPEGII Decoders.
Specifications:
•
On Board Buffer: 16 Mbytes
• RF Tuner Connector: 75 Ohms IEC female
Type
• Loop Through Connector: 75 Ohms IEC male
Type.
• Input Frequency Range:
UHF: 470 MHz to 862 MHz.
VHF: 174 MHz to 230 MHz.
• Channel Bandwidth: 6MHz / 7MHz / 8MHz.
• Channel Assignment: C.C.I.R Channel and
+/- 166.666KHz offset.
• COFDM Spectrum: 2k and 8k carriers
non-hierarchical and hierarchical.
• Standards: DVB-T and DTG compliant.
• Modulation Modes: QPSK, 16QAM and 64QAM.
• Guard Interval Modes: 1/32, 1/16, 1/8 and
1/4 active symbol duration.
• DVB-ASI Connector: 75 Ohms BNC.
• Output Signal level: 1.0Vp-p nominal.
• DVB-SPI Connector: 25-pin sub-D.
• DVB-ASI Output Bit Rate: 0 to 214 Mbit/s.
• DVB-SPI Output Bit Rate: 0 to 108 Mbit/s.
• DVB-ASI Output Clock: 270 MHz.
• DVB-SPI Output Clock: 0 to 13.5 MHz.
• DVB-SPI Output Level: LVDS.
• Size WxL: 107mm x 175mm.
Please click HERE to
download the datasheet.


