AT800USB
DVB-T Receiver, Full TS Receiver, Recorder, DVB-T to DVB-ASI/SPI Converter & DVB-ASI/SPI
Player
Standard Features:
• Combined DVB-T
Input and DVB-ASI/SPI Output Device.
• High Speed USB 2.0
• Windows 2000 & XP Drivers and BDA / Direct Show Drivers &
API.
• Accompanied by DVSStation2 Alitronika's Application
Software.
Input
• DVB-T Compliant COFDM Reception.
• Input Frequency Range:
• UHF: 470 MHz to 862 MHz.
• VHF: 174 MHz to 230 MHz.
• Modulation Modes: QPSK, 16QAM, 64QAM.
• COFDM Spectrum: DVB-T and DTG compliant.
• Supports 188, 204 Transport Packet Sizes.
Output
•
RF Loop Through Output.
•
Simultaneous two Serial ( ASI ) and one Parallel ( SPI ) Outputs.
•
Supports DVB According to Standard A1010 Rev1 and EN50083.
Block Diagram:
Applications:
Targeted for Digital Video Professionals, Sophisticated End Users and OEMs
The AT800USB is an ideal solution for a number of applications such as:
•
Development Tools.
•
DVB to IP Gateway.
•
DVB-T to DVB-ASI & DVB-SPI
Converter.
•
MPEG-II Transport Stream
Recording, Monitoring, Playing & Processing.
•
Software Based MPEGII
Decoders.
Specifications:
• On Board
Buffer: 16 Mbytes
• RF Tuner Connector: 75 Ohms IEC female Type
• Loop Through Connector: 75 Ohms IEC male Type.
• Input Frequency Range:
• UHF: 470 MHz to 862 MHz.
• VHF: 174 MHz to 230 MHz.
• Channel Bandwidth: 6, 7 & 8 MHz.
• Channel Assignment: C.C.I.R Channel and +/- 166.666KHz
offset.
• COFDM Spectrum: 2k and 8k carriers non-hierarchical
and hierarchical.
• Standards: DVB-T and DTG compliant.
• Modulation Modes: QPSK, 16QAM and 64QAM.
• Guard Interval Modes: 1/32, 1/16, 1/8 and 1/4 active
symbol duration.
• DVB-ASI Connector: 75 Ohms BNC.
• Output Signal level: 1.0Vp-p nominal.
• DVB-SPI Connector: 25-pin sub-D.
• DVB-ASI Output Bit Rate: 0 to 214 Mbit/s.
• DVB-SPI Output Bit Rate: 0 to 108 Mbit/s.
• DVB-ASI Output Clock: 270 MHz.
• DVB-SPI Output Clock: 0 to 13.5 MHz.
• DVB-SPI Output Level: LVDS.
Please click HERE to
download the datasheet.
